Direct answer:TR CU 032/2013 covers listed equipment subject to gauge pressure exceeding 0.05 MPa under specified conditions. Pressure, volume/nominal size, medium group and equipment type jointly determine category, affecting certification/declaration and safety requirements. Names or pressure alone are insufficient.

Scope and Classification Variables

Safety of Pressure Equipment was adopted by EEC Council Decision No. 41 of 2 July 2013 and effective from 1 February 2014. It covers certain vessels, boilers, piping, safety devices and pressure components, with exclusions. Check classification calculations and thresholds against the text and annexes by type.

Classification generally depends on design/permitted pressure, volume/nominal diameter, medium hazard group and temperature. Incorrect medium or category identification can cause incorrect documents and design/manufacturing requirements.

Certification, Declarations and Technical Files

TR CU 032/2013 specifies declarations or certification by category, with design, manufacturing, inspection and safety-justification documents. TR CU 010/2011 machinery or TR CU 016/2011 gas requirements may also apply; analyse parallel applicability by construction and function.

Business Screening Sequence

  1. Identify type, design/permitted pressure, volume/diameter, temperature and medium properties.
  2. Check scope and exclusions; determine category using regulatory formulas and tables.
  3. Determine declaration/certification route, scheme and member-state-resident applicant.
  4. Prepare design files, strength calculations, risk/safety justification, material certificates, welding/inspection records, instructions and tests.
  5. Arrange statutory assessment; verify nameplates, technical passports and document scope.

Large or complex pressure systems also involve responsibilities across design, manufacture, installation, inspection and operation. This article does not replace engineering calculations or classification assessment.

Official Basis

Sources reviewed: 13 November 2026.

Explore Machinery Service ScopeDiscuss Equipment Parameters