Direct answer:TR CU 004/2011 covers electrical equipment within its scope rated at 50–1,000 V AC or 75–1,500 V DC. The regulation and product lists distinguish mandatory certification from declarations. Assess use, type, exceptions and annexes. Many products also require parallel TR CU 020/2011 electromagnetic compatibility checks.
Scope Involves More Than Rated Voltage
Voltage is an initial screening threshold, not a sufficient basis for a conclusion. TR CU 004/2011 covers equipment designed for 50–1,000 V AC or 75–1,500 V DC and lists excluded equipment and specific sectors. Assess function, intended use, power parameters and annexes.
Electrical equipment may be part of machinery or subject to medical, transport, explosive-atmosphere or other specific requirements. Equipment outside these voltage limits cannot automatically be deemed free of all EAEU documentation requirements; check other regulations.
How Do Certification and Declarations Differ?
Annex product lists determine mandatory certification versus declarations. Certification-listed products are assessed by bodies in the Union unified register under prescribed schemes. Eligible applicants issue and register declarations using their own and/or third-party evidence. Commercial practice or customer preference cannot determine document type.
TR CU 004/2011 and TR CU 020/2011 are separate regulations. Equipment within both scopes must meet each set of requirements. Assessment documents may be arranged under applicable rules, but compliance with one regulation does not automatically establish compliance with the other.
Documents and Assessment Steps
- Confirm models, intended use, rated AC/DC voltage, power supply, operating environment and complete configuration.
- Check scope, exclusions and certification/declaration lists under TR CU 004/2011.
- Separately verify TR CU 020/2011 electromagnetic compatibility and product-specific regulations.
- Determine series, batch or single-unit supply and the required member-state-resident applicant.
- Prepare product descriptions, technical files, instructions, risk and safety information, test evidence, model lists and manufacturer/applicant details. The exact list depends on the scheme and product.
- Have appropriately qualified entities complete required testing, assessment, issuance or declaration registration, and verify model coverage and labelling.
Common Misclassifications
- Being within the voltage limits does not mean the same certificate is mandatory in every case.
- CE markings or foreign test reports are not equivalent to the EAEU assessment documents required by TR CU 004/2011.
- Declarations and certificates have separate product lists and cannot be substituted freely. Check current regulations for the actual scheme.
- Use the EAC mark only after completing relevant assessments and meeting applicable rules; the mark is not a separate permit.
This article provides regulatory navigation, not a conclusion for a specific model. Verify all applicable regulations and amendments for each project.
Official Basis
- EEC: TR CU 004/2011, Safety of Low-Voltage Equipment, adopted by Customs Union Commission Decision No. 768 of 16 August 2011; see Article 1, assessment provisions and annexes.
- EEC Official Technical Regulations Directory.
Official sources reviewed: 13 November 2026.