Direct answer:TR EAEU 037/2016 restricts certain hazardous substances in electrical and electronic products within its scope and establishes conformity assessment requirements. Applicability requires checking product scope and exclusions; the name “electronic product” alone is insufficient. Declarations under TR 037/2016 and documents under low-voltage or electromagnetic compatibility regulations address separate requirements and must be identified individually.

Hazardous Substances and Product Scope

The regulation, Restriction of the Use of Hazardous Substances in Electrical and Radio-Electronic Products, was adopted by EEC Council Decision No. 113 of 18 October 2016. It specifies regulated product types, substance concentration restrictions and exclusions. Some products may be excluded by use, category or express provision; check the annexes individually.

This is not a universal chemical testing system for all materials and industries. First establish product applicability, then identify relevant homogeneous materials, bills of materials and supporting evidence.

Declaration Assessment and Evidence Traceability

Conformity confirmation takes the form of a declaration of conformity. Check the current TR EAEU 037/2016 text and unified schemes for applicable declaration schemes and evidence requirements. Assessment may use technical documentation, supplier material information, testing or other evidence. A supplier's material declaration does not establish that the finished product has completed the required declaration procedure.

Electrical and electronic products may also fall under TR CU 004/2011, TR CU 020/2011 or other product-specific regulations. Confirm each regulation's scope, documents and tests separately.

Business Preparation Steps

  1. Confirm the product name, function, models, intended use and destination EAEU markets.
  2. Check the text and annexes of TR EAEU 037/2016 for product scope and applicable exclusions.
  3. Collect bills of materials, critical component/material information, supplier declarations or test evidence to establish traceability.
  4. Confirm testing, document review and EAEU-resident applicant requirements under the regulation and applicable assessment scheme.
  5. Complete the declaration of conformity and verify registration details, covered models and continuing validity.
  6. Screen parallel requirements such as low voltage and electromagnetic compatibility separately, and check final product markings and technical documentation.

Common Misunderstandings and Limitations

  • Supply-chain material declarations support evidence but do not automatically constitute a finished-product declaration of conformity.
  • TR 037/2016 documentation does not replace TR 004/2011 or TR 020/2011 requirements.
  • Exemptions require specific regulatory provisions; “industrial use” or “B2B product” alone does not establish an exemption.
  • Regulations and annexes may be amended. Verify current versions and supporting lists before implementation.

Official Basis

Official sources reviewed: 13 November 2026.

Explore Electrical Product ServicesDiscuss Your Product